28.03.2024, 11:33 UhrDeutsch | English
Hallo Gast [ Registrierung | Anmelden ]

Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
McKenna
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 17.05.2006, 21:15 Uhr



Anmeldung: 17. Mai 2006
Beiträge: 20

Hallo,

ich bin neu in der Kanotix Gemeinde und relativ begeistert. Ein paar Probleme habe ich jedoch noch.
Das dickste:
Beim internetten hängt sich Kanotix nach ca. 10 bis 20 Minuten komplett auf.
Ich surfe mit WLAN mit einer Ralink RT 2500 karte mit WPA an einer FritzBox 7050 mit DHCP.
Super die Karte lief mit der Easter Preview quasi "out of the box" mit WLAN.

Ich habe die üblich verdächtigen cheatcodes wie pci=bios, noapic etc. bereits ausprobiert. Kein Erfolg.

Im Moment bin ich mit nodma unterwegs und das ist seit ca. 10 min stabil (mal sehen wie lange).
Auf dem gleichen Rechner läuft XP mit der gleichen Karte absolut problemlos.
Das sollte doch unter Kanotix auch möglich sein.

Vielen Dank für gute Ideen!

McKenna
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Mrs Armatage
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 18.05.2006, 09:48 Uhr



Anmeldung: 02. Jan 2005
Beiträge: 106
Wohnort: Berlin
Hi,
die Karte funktioniert nicht richtig mit dem mp-Kernel, du musst einen up-Kernel installieren siehe links z.B. den 2.6.16-kanotix-up-1. Dann läufts ohne Abruch.
Gruß UB
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
H-Cl
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 19.05.2006, 11:48 Uhr



Anmeldung: 15. Jun 2004
Beiträge: 22

Der up Kernel hat bei mir nichts gebracht,
s. http://kanotix.com/PNphpBB2-viewtopic-t-17955.html
Auch bei Easter RC4 mit 2.6.16.16-kanotix-up-1 hängt sich die Kiste auf.

Gruß

Holger
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
schnorrer
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 19.05.2006, 14:02 Uhr



Anmeldung: 09. Jan 2006
Beiträge: 1720

Wiie hängt sich auf. Wlan Kernel programm???

Oder streikt der Rechner Komplett.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
McKenna
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 20.05.2006, 15:19 Uhr



Anmeldung: 17. Mai 2006
Beiträge: 20

Hallo,

bei mir hängt sich alles auf. Außer ausschalten habe ich noch keine Lösung gefunden.
Die oben genannte Variante mit nodma läuft bei mir jetzt ca. 4h stabil.
Wenn keine andere gute Idee kommt werde ich erstmal dabei bleiben.
Kernel Update ist mir zu heiß weil ich es noch nie gemacht habe und alles andere wunderbar läuft.

McKenna
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
schnorrer
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 20.05.2006, 15:37 Uhr



Anmeldung: 09. Jan 2006
Beiträge: 1720

Ok, zwar etwas wenig Hwinfo, aber wenns z.Zt. mit nodma lüuft, geht sicherlich auch acpi=on apic=off und nat. nodma
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
McKenna
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 20.05.2006, 19:18 Uhr



Anmeldung: 17. Mai 2006
Beiträge: 20

Hallo Schnorrer,

bin jetzt gerade mit acpi=on und apic=off unterwegs. nodma habe ich rausgenommen. Mal sehen wie lange es gut geht.

Welche hardware Info würde dich denn interessieren?
(Wenn ich eine Ausgabe posten soll: wie geht das mit dem screenshot?)

Gruß

McKenna

_________________
Gruss

McKenna
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
schnorrer
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 20.05.2006, 21:46 Uhr



Anmeldung: 09. Jan 2006
Beiträge: 1720

jurz ausgabe von infobash langt eigentlic für das Problem, oder wnn du in /varlog/dmseg fehlerzeilen findest. so etwas krist die Ursache schneller ein.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
McKenna
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 21.05.2006, 16:11 Uhr



Anmeldung: 17. Mai 2006
Beiträge: 20

Hallo schnorrer,

infobash bringt ja nicht wirklich viel:

CPU[AMD Athlon XP 2500+ clocked at 1833.151 Mhz]
Kernel[Linux 2.6.16.5-kanotix-2 i686]
Up[-4min-] Mem[-300.797/502.168MB-]
HDD[-123GB(28%used)-] Procs[-94-] Client[Shell]



Und hier der Inhalt von dmesg:

Linux version 2.6.16.5-kanotix-2 (root@Kanotix) (gcc version 4.0.3 (Debian 4.0.3-1)) #1 SMP PREEMPT Sat Apr 15 20:20:23 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fbc70
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fab70
ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000
ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x1fff0030
ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff00c0
ACPI: DSDT (v001 SiS 746 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: Debian GNU/Linux, kernel 2.6.16.5-kanotix-2 Default vga=0x317 screen=1024x768 splash root=/dev/hda8 ro ramdisk_size=100000 lang=de apm=power-off nomce vga=0x317 pci=bios acpi=on apic=off
Unknown boot option `2.6.16.5-kanotix-2': ignoring
APIC Verbosity level off not recognised use apic=verbose or apic=debug
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1833.151 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513764k/524224k available (3150k kernel code, 9936k reserved, 949k data, 320k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3670.06 BogoMIPS (lpj=7340126)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: AMD Athlon(tm) XP 2500+ stepping 00
Total of 1 processors activated (3670.06 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
Generic PHY: Registered new driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: cdd00000-cfefffff
PREFETCH window: bda00000-cdbfffff
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Squashfs 2.2-r2 (released 2005/09/0Cool (C) 2002-2005 Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 6144k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f5b0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L120AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda3 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.005.
libata version 1.20 loaded.
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 2408.000 MB/sec
raid5: using function: pIII_sse (2408.000 MB/sec)
raid6: int32x1 693 MB/s
raid6: int32x2 624 MB/s
raid6: int32x4 562 MB/s
raid6: int32x8 502 MB/s
raid6: mmxx1 1414 MB/s
raid6: mmxx2 2305 MB/s
raid6: sse1x1 1382 MB/s
raid6: sse1x2 2266 MB/s
raid6: using algorithm sse1x2 (2266 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Apr 15 2006
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 393216 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 320k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 169, io mem 0xcfffd000
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ndiswrapper version 1.13 loaded (preempt=yes,smp=yes)
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 177
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 177, io mem 0xcfffe000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.101 (c) Dave Jones
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Linux video capture interface: v1.00
input: PC Speaker as /class/input/input1
sis900.c: v1.08.09 Sep. 19 2005
ndiswrapper: driver rt2500 (Ralink Technology, Inc.,04/21/2005, 3.00.03.0000) loaded
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 185
ndiswrapper: using irq 185
saa7130/34: v4l2 driver version 0.2.14 loaded
input: PS2++ Logitech Wheel Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
wlan0: vendor: 'IEEE 802.11g Wireless Card.'
wlan0: ndiswrapper ethernet device 00:09:f3:70:1a:71 using serialized driver rt2500, 1814:0201:1814:2560.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new driver ndiswrapper
ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
ehci_hcd 0000:00:03.2: EHCI Host Controller
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:03.2: irq 193, io mem 0xcffff000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected SiS 746 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 201
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 201, 00:0c:6e:08:f9:da.
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 201
saa7134[0]: found at 0000:00:0b.0, rev: 1, irq: 201, latency: 32, mmio: 0xcfff9c00
saa7134[0]: subsystem: 4e42:0138, board: LifeView FlyVIDEO3000 [card=2,autodetected]
saa7134[0]: board init: gpio is 38500
saa7134[0]: there are different flyvideo cards with different tuners
saa7134[0]: out there, you might have to use the tuner=<nr> insmod
saa7134[0]: option to override the default value.
input: saa7134 IR (LifeView FlyVIDEO30 as /class/input/input3
saa7134[0]: i2c eeprom 00: 42 4e 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 0-0061: chip found @ 0xc2 (saa7134[0])
tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 185
intel8x0_measure_ac97_clock: measured 54826 usecs
intel8x0: clocking to 48000
Adding 2104472k swap on /dev/hda9. Priority:-1 extents:1 across:2104472k
Capability LSM initialized
fuse init (API version 7.6)
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs error (device hda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows.
NTFS volume version 3.1.
NTFS volume version 3.1.
NET: Registered protocol family 17
ndiswrapper: WPA support through 'ndiswrapper' interface is deprecated; use 'wext' interface
ndiswrapper (free_tx_packet:470): packet dropped: C0000001
ndiswrapper (free_tx_packet:470): packet dropped: C0000001
ndiswrapper (free_tx_packet:470): packet dropped: C0000001
ndiswrapper (free_tx_packet:470): packet dropped: C0000001


Vielen Dank für Deine Mühe!

McKenna
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
McKenna
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 21.05.2006, 20:34 Uhr



Anmeldung: 17. Mai 2006
Beiträge: 20

Hallo,

Ergänzung: Die acpi=on apic=off Variante hat sich inzwischen 2 mal aufgehängt. Ich bin wieder zur ndma Variante zurückgekehrt.
Die läuft bisher stabil.

Gruß

McKenna
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
schnorrer
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 21.05.2006, 21:26 Uhr



Anmeldung: 09. Jan 2006
Beiträge: 1720

Ok. scheint ein Bios-Problem zu sein.Beim Hersteller des MoBoards bitte nach einem BIOS-Update sehen und installieren.
ACPI-Tabellen mal wieder nicht ordentlich Programmiert.

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

Beide sollten entweder edge oder level sein nicht so ein Mix.

Hoffe du findest beim Hersteller ein gefixtes Bios.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
McKenna
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 22.05.2006, 18:51 Uhr



Anmeldung: 17. Mai 2006
Beiträge: 20

Hallo schnorrer,

ich habe mein Bios von 2.20 auf 2.60 upgedated und alle Optionen aus dem bootmenu rausgenommen.
An der Ecke hat sich in der Ausgabe von /var/log/demsg jedoch nichts geändert.
Mal sehen wie es jetzt läuft.
Wenn das das Problem war schon mal vielen Dank!

McKenna


EDIT: War leider nichts, (war ja auch nach /var/log/demsg nicht zu erwarten)

Schade - weitere gute Ideen?
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
McKenna
Titel: Kanotix hängt sich auf beim internetten mit WLAN  BeitragVerfasst am: 13.06.2006, 20:25 Uhr



Anmeldung: 17. Mai 2006
Beiträge: 20

Hallo,

hat denn keiner mehr eine Idee?

_________________
Gruss

McKenna
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
PNphpBB2 © 2003-2007 
 
Deutsch | English
Logos and trademarks are the property of their respective owners, comments are property of their posters, the rest is © 2004 - 2006 by Jörg Schirottke (Kano).
Consult Impressum and Legal Terms for details. Kanotix is Free Software released under the GNU/GPL license.
This CMS is powered by PostNuke, all themes used at this site are released under the GNU/GPL license. designed and hosted by w3you. Our web server is running on Kanotix64-2006.