kanotix.com

Networking - setting internet connection

Freedie - 23.06.2006, 06:44 Uhr
Titel: setting internet connection
I am newbie to kanotix as well as linux.All worked well except the inability to connect to internet.How to set up internet connection with my type of connection. I use Conexant AccessRunner USB ADSL Wan Adapter modem with broadband connection.I dont have router and ethernet interface.Please help me?????????????
mzilikazi - 23.06.2006, 20:26 Uhr
Titel: RE: setting internet connection
Well there is a tool for configuring the network card. Get root and run the tool.
Code:
su
netcardconfig


Alternatively it should be found in the Kanotix menu IIRC.
Freedie - 24.06.2006, 16:27 Uhr
Titel:
Sorry,I think I dont have network card
piper - 24.06.2006, 16:46 Uhr
Titel:
Freedie

K-menu --> Kanotix --> Network/Internet -->Network Card Configuration

or

On the kicker, fish icon --> Network/Internet -->Network Card Configuration
Freedie - 24.06.2006, 16:55 Uhr
Titel:
How I could configure network card when I dont have network card in my computer
piper - 24.06.2006, 17:06 Uhr
Titel:
Ah, good question, sorry I misunderstood you ! Traurig

I have never used or configured a USB ADSL connection before, but, the physical installation of a USB modem is similar to an ethernet modem.

There is no ethernet card necessary obviously. So connect the phone line between the DSL wall jack and the modem's DSL port, and attach the USB cable to the computer's USB port.
Freedie - 24.06.2006, 17:56 Uhr
Titel:
Does DSL got phone line?
Sorry for stupid question.
And one more,I use broadband
drb - 24.06.2006, 17:59 Uhr
Titel:
I eventually brought a cheap router which just works compared with the difficulties withgetting USB modems to work / start up on boot etc..

Try http://sourceforge.net/project/showfile ... p_id=47406 for drivers etc.

drb
Freedie - 24.06.2006, 18:10 Uhr
Titel:
I know it but I dont know how to use the driver.
And how much is the router.
Is it a wireless router or normal router?
piper - 24.06.2006, 18:16 Uhr
Titel:
Freedie

Yes DSL needs a phone line (atleast here in the states Smilie)

Your best bet would to buy a cheap network card and a router, but I am sure someone else has set it up without the above, you can also use google for setup configuration on your modem in linux
Freedie - 24.06.2006, 18:20 Uhr
Titel:
Sorry I dont understand.
Im not connecting to internet through my telephone line.
My telephone can be used when Im on the internet.
piper - 24.06.2006, 18:26 Uhr
Titel:
DSL

ADSL
Freedie - 24.06.2006, 18:35 Uhr
Titel:
So?
piper - 24.06.2006, 18:46 Uhr
Titel:
Well here you are telling me you are NOT connected to the internet thru the telephone line

Freedie hat folgendes geschrieben::
Sorry I dont understand.
Im not connecting to internet through my telephone line.
My telephone can be used when Im on the internet.



Here your saying you have ADSL

Freedie hat folgendes geschrieben::
I am newbie to kanotix as well as linux.All worked well except the inability to connect to internet.How to set up internet connection with my type of connection. I use Conexant AccessRunner USB ADSL Wan Adapter modem with broadband connection.I dont have router and ethernet interface.Please help me?????????????



ADSL is your Broadband

Here I tell you HOW to connect to the best of my knowledge having never used or setup ADSL

piper hat folgendes geschrieben::
Ah, good question, sorry I misunderstood you ! Traurig

I have never used or configured a USB ADSL connection before (especially in linux), but, the physical installation of a USB modem is similar to an ethernet modem.

There is no ethernet card necessary obviously. So connect the phone line between the DSL wall jack and the modem's DSL port, and attach the USB cable to the computer's USB port.


With

So connect the phone line between the DSL wall jack and the modem's DSL port, and attach the USB cable to the computer's USB port.

Being the key Smilie

I hope this helps if not, maybe some one else can explain better than I can or has experince in DSL/ADSL
Freedie - 24.06.2006, 18:52 Uhr
Titel:
I dont know.
Yes it is stated as ADSL but Im not using telephone line.
Just identify my modem as DSL
piper - 24.06.2006, 19:04 Uhr
Titel:
Freedie hat folgendes geschrieben::
I dont know.
Yes it is stated as ADSL but Im not using telephone line.
Just identify my modem as DSL


If your not using telephone line, then how do you plan on connecting to the internet ?
Freedie - 24.06.2006, 19:13 Uhr
Titel:
That why I come here.
piper - 24.06.2006, 19:24 Uhr
Titel:
What country do you live in and who is your ISP ?
Freedie - 24.06.2006, 19:41 Uhr
Titel:
I live in Malaysia and my ISP is tmnet or sharper TMNet Streamyx.
Streamyx is for broadband.
drb - 24.06.2006, 20:17 Uhr
Titel:
I believe Streamyx uses ADSL (xDSL). You should be able to use broadband and your telephone line at the same time. You need to split your telephone line, install a filter in the phone line, and connect one 'telephone' connector to your modem. Getting this modem to work under Linux can be done but an ADSL modem/router is easier. It doesn't need to be wireless; it will have an input for your 'telephone' connection. An ADSL modem / router will cost about $40. (Your PC will need to have an ethernet network card to connect to the router - if you don't have one, this is <$10 for a PCI card). Looking at the Sreamyx website, they appear to provide a networked modem so try and change the USB modem they have provided for a network modem.

drb
piper - 24.06.2006, 20:46 Uhr
Titel:
Thanks drb, that is why I ask him who his ISP was so I could have checked the info he needed at their site Smilie
Freedie - 25.06.2006, 08:07 Uhr
Titel:
I bought this modem from my computer vendor,not from my ISP.
So if the router is 40 USD (I guess) so the router my country will be about RM 150 (1 USD = RM 3.60) and I had to buy a PCI card for $ 10 so through the exchange will be RM 36 and the total is nearly RM 190.
Very expensive to me ( im poor)
piper - 25.06.2006, 08:21 Uhr
Titel:
You can go here and pm this guy named iZuDeeN

He can probably help you out, and lives in Malaysia

iZuDeeN


This is a FAQ for streamyxdsl



This is a forum for Southeast Asian Broadband


You can probably get the info you need to setup your connection at any one of this sites, sorry I don't know more about this
Freedie - 25.06.2006, 10:08 Uhr
Titel:
Thanks for your reply,Im posting question there.
But can someone here(kanotix english forum) solve my problem.
I think its better to solve problem here rather going to other forum and posting another thread here.I already posted this thread in slax,knoppix,sourceforge and here so I have to check many forums.
( doesnt matter as long my problem can be solved.)
stryder - 25.06.2006, 11:47 Uhr
Titel:
Freedie, streamyx uses the telephone line - you will see a telephone line connected to your modem. You can use your telephone at the same time. Telekom provides you with a splitter to filter out the noise when you use the phone line.

I can't help you with your usb modem - never used one. Hopefully someone here can help - perhaps you should change your thread title to: how to configure USB ADSL Modem in kanotix, assuming that's the OS you are using. BTW, are you using kanotix, because hardware detection would be quite crucial. And you might want to just see if you can access your modem by going to 192.168.1.1 using your browser. If so, the settings there can help someone here figure out how to help you.

If your modem has two outlets - USB and Ethernet, then use the Ethernet. A network card costs about RM30. Configure using PPPOE. Otherwise, good luck. Smilie

DSLreports is helpful. Another forum you should try is forum.lowyat.net which has a broadband/streamyx section and a tech support subsection. Unfortunately your issue is configuring the modem in linux (I assume everything works in XP since a driver should be provided with your modem) but you might be lucky to find a linux user there. But ask the right question: how to configure/set USB adsl modem in linux (and tell people the distro you are using).

Hope this helps in some way.
Freedie - 25.06.2006, 13:06 Uhr
Titel:
Stryder,are you a malaysian?
Just asking,you may ignore my question. Sehr glücklich
stryder - 25.06.2006, 14:02 Uhr
Titel:
Ya. PJ City. Thot it was obvious from my reply... Smilie

BTW, be careful during electric thunderstorms. Best to disconnect the phone line. Or use some lightning protector. Most times modems get fried. But a friend of mine had his motherboard fried because of the usb connection.
Freedie - 25.06.2006, 15:39 Uhr
Titel:
Stryder,do you have any router or ethernet interface?
Can you connect to internet from kanotix?
I have some lightning protector( my ISP get it for me).
stryder - 25.06.2006, 16:53 Uhr
Titel:
I use the zte modem given by streamyx, connected via ethernet. With kanotix, use pppoe. As I said the problem is that your modem is usb. No experience with it.
Freedie - 25.06.2006, 17:27 Uhr
Titel:
So,do you have a router?
stryder - 25.06.2006, 17:41 Uhr
Titel:
no.
Freedie - 25.06.2006, 17:46 Uhr
Titel:
So,what is my minimal requirement to enable internet in kanotix?
Would it do with ethernet card only?
stryder - 26.06.2006, 16:24 Uhr
Titel:
An adsl modem that connects to your computer using ethernet and of course an ethernet card on your computer.
Freedie - 26.06.2006, 16:35 Uhr
Titel:
If I only have an ADSL modem?
piper - 26.06.2006, 17:25 Uhr
Titel:
Freedie hat folgendes geschrieben::
So,what is my minimal requirement to enable internet in kanotix?
Would it do with ethernet card only?


A Phone Line

Which has to be split as was said here

drb hat folgendes geschrieben::
I believe Streamyx uses ADSL (xDSL). You should be able to use broadband and your telephone line at the same time. You need to split your telephone line, install a filter in the phone line, and connect one 'telephone' connector to your modem. Getting this modem to work under Linux can be done but an ADSL modem/router is easier. It doesn't need to be wireless; it will have an input for your 'telephone' connection. An ADSL modem / router will cost about $40. (Your PC will need to have an ethernet network card to connect to the router - if you don't have one, this is <$10 for a PCI card). Looking at the Sreamyx website, they appear to provide a networked modem so try and change the USB modem they have provided for a network modem.

drb


There is no ethernet card necessary obviously. But a smart move and will make things easier and a faster connection !

Connect the phone line between the DSL wall jack and the modem's DSL port, and attach the USB cable to the computer's USB port.
Freedie - 27.06.2006, 07:31 Uhr
Titel:
Zitat:
Connect the phone line between the DSL wall jack and the modem's DSL port, and attach the USB cable to the computer's USB port.



I have already done that.
Did you mean redo it?
aYie28 - 01.07.2006, 20:20 Uhr
Titel:
how about setting an usb network card device ? where and how i can do it ?
Alle Zeiten sind GMT + 1 Stunde
PNphpBB2 © 2003-2007